Get a certified electrician to install your EV charger. Serving Perth, Melbourne, Sydney, Brisbane & Adelaide. Same-week availability in most areas.
(08) 6017 2504Takes 60 seconds — we'll connect you with a local installer who will contact you
Three simple steps from enquiry to installation — no fuss, no surprises.
Call us on (08) 6017 2504 or fill in the quick form above. We'll ask a few simple questions about your home and EV.
We match you with a vetted local EV charger installer in your area. They'll contact you directly to confirm details and arrange the job.
Your EV charger is professionally installed, tested, and certified. Most residential jobs are completed the same week, often next business day.
From residential home chargers to commercial EV infrastructure — we do it all.
Certified installation of Gen 2 and Gen 3 Tesla Wall Connectors. Single and three-phase options available for all Tesla models.
Expert installation of all smart EV chargers including Zappi, Wallbox Pulsar, Fronius Wattpilot, and all OCPP-compatible units.
Standard 7.4kW single phase charging solution — ideal for most homes. Typically 6–8 hours to full charge overnight.
Fast 22kW three-phase charging for supported vehicles and homes. Cuts charge time dramatically — ideal for higher usage EVs.
Older switchboards often need upgrading before EV charger installation. We handle the full switchboard assessment and upgrade.
Multi-bay charging solutions for offices, car parks, and retail centres. Load management, billing integration, and smart controls.
In Australia, EV charger installation must be carried out by a licensed electrician. Here's why it matters.
Australian standards AS/NZS 3000 require all electrical work including EV charger installation to be performed by a licensed electrician.
DIY or unlicensed installation voids your home insurance and charger warranty. Licensed work is fully insured and compliant.
Incorrect wiring is a major fire risk. Licensed electricians size cables correctly, install proper protection, and certify the work.
You receive a Certificate of Electrical Safety — required for insurance claims, home sales, and grid-connected solar systems.
Everything you need to know about EV charger installation in Australia.
In most Australian states, a standard residential EV charger installation does not require council approval — only an electrical permit and compliance certificate from your licensed electrician. However, if significant structural work or underground trenching is involved, a building permit may be required. Your installer will advise you.
Most modern EVs (Tesla, BYD, Hyundai Ioniq, Kia EV6, MG, Volvo) work with standard Type 2 AC chargers. Tesla vehicles use a proprietary connector but Tesla Wall Connectors are widely supported. We'll match you with the right charger based on your vehicle make and model, home power supply, and budget.
Most standard residential EV charger installations take 2–4 hours on the day. If switchboard upgrades or additional cabling runs are required, allow 4–6 hours. We typically book jobs within 1–5 business days of your quote being approved, and same-week appointments are usually available.
Yes — several Australian states offer rebates and incentives. Victoria offers the ZEV Subsidy which includes charger installation support. The ACT has various EV incentives. Some electricity retailers also offer EV tariffs and rebates for smart charger installation. We'll advise you on what's available in your state at the time of your quote.
Single phase (240V) delivers up to 7.4kW — sufficient for overnight charging of most EVs, adding roughly 40–50km of range per hour. Three phase (415V) delivers up to 22kW but requires three-phase power at your property (common in newer homes and commercial premises). Not all EVs accept three-phase AC charging — your vehicle's onboard charger determines the maximum rate.
Yes — smart EV chargers like the Zappi and Fronius Wattpilot are designed to integrate with solar inverters and prioritise charging from excess solar generation. This can significantly reduce your charging costs. We can configure your charger to work with your existing solar system.
Homes built before 2000 often have older switchboards that may need upgrading before an EV charger can be safely installed. Our electricians assess your switchboard during the site visit and will quote any required upgrades upfront. Your installer will quote any required upgrades upfront.
We install all major EV charger brands including Tesla Wall Connector, Zappi, Wallbox Pulsar, Fronius Wattpilot, ABB Terra, EVNEX, Clipper Creek, and all OCPP-compatible units. If you've already purchased a charger, we can install it. If you need a recommendation, we'll suggest the best option for your vehicle and home setup.
Licensed electricians available across Australia's major cities and surrounding suburbs.
We cover all major suburbs across your area. Click your suburb for local info.
No obligation. A local installer will be in touch as soon as possible.
⚡ Same-Week Availability
Most residential installations booked within 1–5 business days. Call now to secure your spot.